P.C.S. Thyristorised controlled D.C. drives are designed for rugged and continuous use.  Several features have been incorporated to make the equipment foolproof so that it can give trouble free operation over a period of years. Such operations not only safeguards the D.C. drive unit but also protects the motor. The units are supplied in ready to wire up form as per customer needs. They can be used in various industrial operations such as synchronizing, tension control, cutting loads, interfacing with intelligent systems, to name a few, Latest integrated circuit technology  has been used to achieve high reliability and compact size.

Model No: P.D.C - 501
Specifications:

  • Input supply : 230V +/- 20%, +/-10%.

  • Range : 0.25h.p-3h.p.

  • Output voltage at ideal conditions.
    (No Load) 0-200V.

  • Output d.c. voltage for field: 200V constant.

  • Feedback : Armature voltage or tacho
    Armature current through shunt or C.T
    Feedback

  • Speed regulation : Better than 7.5% by armature.
    Better than 2% by A.C. Tacho feedback. Better than
    1% by D.C. Tacho feedback.

  • Overload setting : Adjustable from 0 - 120%.      

Model No : P.D.C. - 502
Specifications:
  • Input supply : 0 - 230V.
  • Range : 2hp. to 5hp.
  • Output voltage at ideal conditions.
    (No Load) 0 - 200V.
  • Output d.c.voltage for field : 200V constant.
  • Feedback : Armature voltage or tacho
    Armature current through shunt or C.T
    Feeback
  • Speed regulation : Better than 7.5% by armature.
    Better than 2% by A.C. Tacho feedback. Better than
    1% by D.C. Tacho feedback.
  • Overload setting : Adjustable from 0 - 120%.

Model No : P.D.C. - 502 A.
Specifications:
  • Input supply : 0 - 415V. (Two phase)
  • Range : 3h.p. to 7.5h.p.
  • Output voltage at ideal conditions.
    (No Load) 0 - 380V.
  • Output d.c. voltage for field : 200V constant.
  • Feedback : Armature voltage or tacho
    Armature current through shunt or C.T
    Feedback
  • Speed regulation : Better than 7.5% by armature.
    Better than 2% by A.C. Tacho feedback. Better than
    1% by D.C.Tacho feedback.
  • Overload setting : Adjustable from 0 - 120%.

          Standard Protections offered.

  • Field failure protection.
  • Protection.

    Optional Protection Offered.
      
  • Under voltage input supply.

  • Over voltage input Supply.
Add on facility : Synchronising, Motorised potentiometer, dynamic braking, zero start, fault annaunciator, Latching with audio - visual indications. Overload

Model No : P.D.C. - 503.
Specifications :
  • Input supply : 0-415V. (Three phase)
  • Range : 3h.p. to 15 h.p.
  • Output voltage at ideal conditions.
    (No Load) 0 - 440V.
  • Output d.c. voltage for field : 200V constant.
  • Acceleration time : 3-30 sec. adjustable.
  • Deacceleration time : 3-30 sec. adjustable.
  • Feedback : Armature voltage or tacho
    Armature current through shunt or C.T
    Feedback
  • Speed regulation : Better than 7.5% by armature.
    Better than 2% by A.C. Tacho feedback. Better than
    1% by D.C. Tacho feedback.
  • Overload setting : Adjustable from 0 - 120%.

    Standard Protections Offered.
  • Field failure protection.
  • Overload Protection.
  • Phase sequence fail.

    Optional Protection Offered.
          
  • Under voltage input supply.

  • Over voltage input Supply.

Add on facility : Synchronising, Motorised potentiometer, dynamic braking, zero start, fault annaunciator, Latching with audio-visual indications.

Model No Dimensions TYPE H.P
DRM - 1 96 x 220 x 150 Drive with single meter. 0.25 - 2h.p.
TDR - 72. 72 x 72 x 110 Single phase drive 0.25 - 0.5h.p.
TDR - 92 96x 96 x 150 Single phase drive 0.25 - 1h.p.
TDR - 144 144 x 144 x 300 Drive with two meters. 0.5 - 2h.p.


We make Custom built Control Panels and also under take complete project work.

 

 
PC.S Temperature controllers are designed for rugged and continuous use. These controllers are compact with latest solid state integrated circuitry. We offer a wide range of temperature controller in Analog and digital type.
Digital Temperature controllers

          DTC - 92.

  • Dimensions : 96 x 96 x 150 mm.
  • Cut out size : 90 x 90 mm.
  • Input : Fecon/CrAI/PT-100. (Two, three wire type)
  • Range 30 deg.c to 1200 deg.c
  • Display : 3 and half digit L.E.D. Display.
  • Indication : Sensor break indication/Heater on/off indication.
  • Output : One set of relay changeover.
  • Control action : On/Off and Time proportional

 
          DTCF - 92
  • Dimensions : 96 x 96 x 150 mm.
  • Cut Out Size : 92 x 92 mm.
  • Input : Fecon/CrAI/PT-100. (Two, three wire type)
  • Range 30 deg.c to 1200 deg.c
  • Display : 3 and half digit L.E.D. Display.
  • Indication : Sensor break indication/Heater on/off indication.
  • Output : One set of relay changeover.
  • Control action : On/Off/Time Proportional.
Blind Temperature Controller

P.C.S. Potentiometric type analog temperature controllers are compact with latest integrated circuitry.

Blind temperature controllers are available in two basic types one with single set point and other with two set points i.e. heating and cooling applications.
          BTC 92 D4
  • Dimensions : 96 x 96 x 150 mm.
  • Cut Out Size : 90 x 90 mm.
  • Input : Fecon/CrAI/PT - 100. (Two, three wire type)
  • Range 30deg.c to 1200ºC.
  • Display : Deviation Meter.
  • Indication : Sensor break indication/Heater on/off indication.
  • Output : One set of relay changeover.
  • Temperature range : (0-400 Degree Centigrade)

 

          BTC 92 D1
  • Dimensions : 96 x 96 x 150 mm.
  • Cut Out Size : 90 x 90 mm.
  • Input : Fecon/CrAI/PT - 100. (Two, three wire type)
  • Range 30deg.c to 1200ºC.
  • Display : Deviation Meter.
  • Indication : Sensor break indication/Heater on/off indication/cooler indication.
  • Output : One set of relay changeover.
  • Temperature range : (0-200 Degree Centigrade)
           BTC 72A
  • Dimensions : 72 x 72 x 110 mm.
  • Cut Out Size : 68 x 68 mm.
  • Input : Fecon/CrAI/PT - 100. (Two, three wire type)
  • Range 30deg.c to 1200ºC.
  • Display : Without Deviation Meter.
  • Indication : Sensor break indication/Heater on/off indication.
  • Output : One set of relay changeover.
  • Temperature range : (0-400 Degree Centigrade)
          BTC 72
  • Dimensions : 72 x 72 x 110 mm.
  • Cut Out Size : 68 x 68 mm.
  • Input : Fecon/CrAI/PT - 100. (Two, three wire type)
  • Range 30deg.c to 1200ºC.
  • Display : Without Deviation Meter.
  • Indication : Sensor break indication/Heater on/off indication/cooler indication.
  • Output : One set of relay changeover.
  • Temperature range : (0-200 Degree Centigrade)

 

 

           BTC 72D
  • Dimensions : 72 x 72 x 110 mm.
  • Cut Out Size : 68 x 68 mm.
  • Input : Fecon/CrAI/PT - 100. (Two, three wire type)
  • Range 30deg.c to 1200ºC.
  • Display : Deviation Meter.
  • Indication : Sensor break indication/Heater on/off indication/cooler indication.
  • Output : One set of relay changeover.
  • Temperature range : (0-400 Degree Centigrade)
Temperature Indicator :

          Model No: DTI - 72.

  • Dimensions : 72 x 72 x 110 mm.
  • Cut Out : 68 x 68 mm.
  • Input : Fecon/CrAI/PT-100. (Two, Three wire type)
  • Range 30ºC to 1200ºC.
  • Display : 3 and half digit L.E.D. Display.
  • Indication : Sensor break indication/Heater on/off indication.

 

 

 
  • Dimensions : 96 x 96 x 150 mm.
  • Cut Out Size : 90 x 90 mm.
  • Range : 2 to 4 digits.
  • Reset : Manual/Auto.
  • Range : Sec/Min/Hour.
  • Mode : Ondelay/Off delay/Cyclic/On/Off delay.

 

  

 

   
 

P.C.S Counters are designed for rugged & Continuous use. These Counters are compact with latest solid state integrated circuitry.
Model No : PC 48.
  • Dimensions : 48 x 96 x 110 mm.
  • Cut Out Size : 46 x 46 mm.
  • Input : Relay Contacts / Pulses.
  • Range : 2 - 6 digits.
  • Optional : Nonvolatile memory.
  • Signal : Proximity Switch/Limit Switch.

 
Model No : PC 72T.
  • Dimensions : 72 x 72 x 110 mm.
  • Cut Out Size : 68 x 68 mm.
  • Input : Relay contacts / Pulses.
  • Range : 2 - 6 digits.
  • Optional : Nonvolatile memory.
  • Signal : Proximity Switch/Limit Switch.
Model No : PC 72T.
  • Dimensions : 72 x 72 x 110 mm.
  • Cut Out Size : 68 x 68 mm.
  • Input : Relay contacts / Pulses.
  • Range : 2 - 6 digits.
  • Optional : Nonvolatile memory.
  • Signal : Proximity Switch / Limit Switch.
  • Thumbwheel for presetting of counts.
Model No : PC 92T.
  • Dimensions : 96 x 96 x 150 mm.
  • Cut Out Size : 90 x 90 mm.
  • Input : Relay contacts / Pulses.
  • Range : 2 - 6 digits.
  • Optional : Nonvolatile memory.
  • Signal : Proximity Switch / Limit Switch.
  • Thumbwheel for presetting of counts.
Model No : PC 92D
  • Dimensions : 96 x 96 x 150 mm.
  • Cut Out Size : 90 x 90 mm.
  • Input : Relay contacts / Pulses.
  • Range : 2 - 6 digits.
  • Optional : Nonvolatile memory.
  • Signal : Proximity Switch / Limit Switch.

 


P.C.S. Vibrator controllers are designed for rugged and continuous use. These controllers are compact with latest solid state integrated circuitry.

Model No : VB 102.
  • Dimensions : 72 x 72 x 110 mm.
  • Input : 230 V (For Single phase).
  • Range : 2Amp.
  • Output : Pulsating D.C.

Model No : VB 112.
  • Input : 230 V for Single phase only.
    440V for 2 phase only.
  • Range : 3A, 6A, 12A.
  • Coarse and fine adjustment facility.

 

 

 

 
 

Model No.

Size

 Item Size
DPM - 1 48 x 92 x 110 mm Voltmeter. 72 x 72 x 110 mm
DPM - 2 48 x 92 x 110 mm Ammeter 72 x 72 x 110 mm
DPM - 3 48 x 92 x 110 mm M.P.M 72 x 72 x 110 mm

 
Prime Control System machine vision hardware and software solve a variety of applications ranging from inspecting automotive parts to verifying pharmaceutical packaging. For industrial applications, choose the PCS Vision Systems, which deliver more power and precise control inspection/monitoring on any production-oriented industries. Special lights and high resolution CCD Cameras used for different application needs. Our software module developed considering many different application process hence, can be configured to suite any other machine vision solutions.

Site designed and maintained by Prime Control System